You can charge your Radiacode device safely and efficiently using any standard charger that supports USB or USB Type-C connections.
Charging Instructions:
1. Select a Compatible Charger:
- Use any standard USB or USB Type-C charger.
- Chargers supporting Power Delivery (PD) or other fast-charging technologies are compatible and will not damage the device.
- High-power chargers are safe to use; the device regulates the power it draws to prevent overcharging.
2. Connect the Charging Cable:
- Plug one end of the USB or USB Type-C cable into the charging port of the Radiacode device.
- Connect the other end of the cable to the charger or a USB port on your computer.
3. Begin Charging:
- Once connected, the blue LED light on the device will illuminate, indicating that charging has started.
- If the blue LED does not light up, ensure that the connections are secure and the power source is functioning.
4. Monitor the Charging Process:
- The device does not display the battery level during charging.
- Allow the device to charge uninterrupted until it reaches full capacity.
- Charging times may vary depending on the power output of the charger used.
- Avoid interrupting the charging process to prevent inaccurate battery level readings.
5. Confirm Full Charge:
- Charging Complete Indicator: The most reliable way to confirm that the device is fully charged (100%) is when the blue LED light turns off.
- Once the blue LED extinguishes, the device has reached a full charge.
- Some models may indicate a full charge by turning off the charging light or displaying a full battery icon.
6. Disconnect the Charger:
- Unplug the charging cable from both the device and the power source.
- Your Radiacode device is now ready for use.
Important Notes:
- Charger Quality:
- Always use high-quality charging cables and chargers to ensure device safety and longevity.
- Safe to Use Fast Chargers:
- Fast charging systems like Power Delivery (PD) will not harm the device; the Radiacode device is designed to handle varying power inputs safely.
- Battery Maintenance:
- Regular charging helps maintain battery health.
- Avoid letting the battery discharge completely before recharging.
- Unique Charging Behavior:
- The Radiacode device has a non-typical charging scheme.
- It does not display the battery level during the charging process.
- Interrupting the charging may cause inaccurate battery level readings.
- No Risk from High-Power Chargers:
- Using chargers with higher power ratings is safe; the device will only draw the power it requires.
- Avoid Overheating:
- Charge the device in a cool, ventilated area to prevent overheating.
- Charging Indicator:
- The extinguishing of the blue LED is the definitive indicator that the device is fully charged.
Troubleshooting:
- Device Not Charging:
- Ensure the charging cable and charger are functioning by testing them with another device.
- Check the charging port for debris or damage.
- Try using a different power source or USB port.
- Charging Indicator (blue LED) Does Not Illuminate:
- Verify that the device is properly connected.
- Restart the device and attempt to charge again.
- If Issues Persist:
- Contact Radiacode technical support team for assistance.
Contact Information:
By following these instructions, you can safely and effectively charge your Radiacode device, ensuring it is always ready for use when you need it.
