If the device is connected, the device settings can be accessed through the navigation menu (pictogram , located in the upper left corner of the screen). The settings shown in the application are retrieved from the device and match the settings available through the device's own menu.

Please note that to transfer the settings to the device, you need to tap the button located at the top right corner of the screen.

Measuring unit: You can select microroentgens or Sieverts.

Device language: The language of the inscriptions displayed on the device screen.

Dose Rate Alarms: Dose rate alarm thresholds can be configured. If the registered emission level exceeds the specified values, then, depending on the settings for and , an audio signal and vibration will be triggered. In the application settings, you can configure the smartphone to repeat the device alarms through its speaker.

Dose Alarms: You can set thresholds for alarms based on the level of accumulated emission dose.

Count Rate Alarms:You can set thresholds for count rate alarms.

Continuously: When an alarm occurs, the device will emit the specified signals (sound and/or vibration) at regular intervals until the user presses the button on the device body or mutes the alarm sound from the application using the button.

Once: Each time an alarm occurs, the device will emit the specified signals once.

Display backlight:You can choose the operating mode for the device display's backlight.

Display rotation: You can choose the image rotation mode on the device display. "Automatically" means the device will determine the image orientation using the built-in accelerometer.

The “Calibration factors": a dialog box opens where you can manually adjust the spectrum calibration factor values, which the device uses to convert the spectrum channel number into the radiation energy value in keV. In the application, you can calibrate the energy scale of the spectrum.

Device settings can be saved as profiles. All device settings and spectrum calibration factors are stored within the profile. To save a profile, tap the three-dot icon in the upper right corner of the screen, select "Save Profile," and enter a name for the profile. Later, you can load a profile from the profile library using the "Load Profile" menu item.