Device Does Not Turn On

If your Radiacode device does not turn on after a prolonged period of inactivity, it may have entered battery protection mode. This feature prevents the lithium battery from discharging to levels that could potentially damage it.

Possible Symptoms:

• The device does not power on.
• The device does not begin charging when connected to a power source.
• The LED indicators do not illuminate.

Steps to Reactivate the Device:

1. Connect to a Power Source:

• Action: Plug the device into a reliable power outlet using the appropriate USB or USB Type-C charging cable.
• Observation: The blue LED indicator should light up, indicating that the device is receiving power.

2. Reset the Charging Process:

• Action: Disconnect the power cord from the device.
• Action: Quickly reconnect the power cord back to the device within a few seconds.

3. Verify Charging Status:

• Observation: The device should now begin charging normally.
• Check: Ensure that the blue LED remains illuminated or that any charging indicators (if available on your model) are active.

4. Attempt to Power On the Device:

• Action: Press the power button to turn on the device after it has charged for a few minutes.
• Observation: The device should power on and function as expected.

Additional Tips:

• Use Original Accessories: Always use the original charging cable with your Radiacode device, or certified replacements, to ensure compatibility and safety.
• Check Power Source: Verify that the power outlet or USB port you are using is functioning correctly by testing it with another device.
• Allow Time for Charging: If the battery was deeply discharged, it might take a few minutes before the device responds. Leave it connected to the power source for at least 10-15 minutes before attempting to turn it on again.
• Avoid Frequent Deep Discharges: To maintain battery health, try to charge the device periodically, especially if it has not been used for an extended time.

If the Issue Persists:

Contact Technical Support: If the device still does not turn on or charge after following the steps above, please reach out to our support team for further assistance.

• Email: support@radiacode.com
• Telegram: Radiacode Support Channel

By following these instructions, you should be able to reactivate your Radiacode device safely and resume normal operation. The battery protection mode is a safeguard designed to extend the lifespan of your battery by preventing harmful deep discharges.