Docs
Alarm system

Setting alarm thresholds

For each of the three quantities (count rate, dose rate, accumulated dose) two alarm thresholds can be set. The procedure is the same.

Count rate — alarm levels

Grid Item
  • Navigate to [Count Rate]. Enter the submenu.
Grid Item
Grid Item
  • Enter [Alarm 1]. Select a digit, change its value. Set all digits.
Grid Item
Grid Item
  • Select [Enter] or [Esc]. Long-press to confirm.
Grid Item
Grid Item
  • Navigate to [Alarm 2]. Same procedure.
Grid Item
Grid Item
  • [Enter] or [Esc]. Long-press to confirm.
Grid Item
Grid Item
  • To go back: [< Back] or [<< Menu quit].
Grid Item

Dose rate — alarm levels

Grid Item
  • Navigate to [Dose Rate]. Enter the submenu.
Grid Item
Grid Item
  • Enter [Alarm 1]. Select a digit, change its value.
Grid Item
Grid Item
  • [Enter] or [Esc]. Long-press to confirm.
Grid Item
Grid Item
  • Navigate to [Alarm 2]. Set values.
Grid Item
Grid Item
  • [Enter] or [Esc]. Long-press to confirm.
Grid Item
Grid Item
  • To go back: [< Back] or [<< Menu quit].
Grid Item

Dose — alarm levels

Grid Item
  • Navigate to [Dose]. Enter the submenu.
Grid Item
Grid Item
  • Enter [Alarm 1]. Select a digit, change its value.
Grid Item
Grid Item
  • [Enter] or [Esc]. Long-press to confirm.
Grid Item
Grid Item
  • Navigate to [Alarm 2]. Set values.
Grid Item
Grid Item
  • [Enter] or [Esc]. Long-press to confirm.
Grid Item
Grid Item
  • To go back: [< Back] or [<< Menu quit].
Grid Item

Updated: Oct 21, 2026