Indication: sound, vibration, light
Radiacode Zero has built-in sound and vibration sources to acknowledge button presses and to indicate events and alarms. Light indication is provided for monitoring from a distance. For visual monitoring, the main states are shown as icons on the display.
Sound can accompany:
- Turning the device on and off
- Button press
- Bluetooth connection established
- Photon registration
- Alarm threshold exceeded
- Low battery charge
- Response to the “Find the device” request
Vibration can accompany:
- Turning the device on and off
- Button press
- Alarm threshold exceeded
- Response to the “Find the device” request
Light indication:
- Battery charging — blue, steady
- Photon registration under normal conditions — green, flash
- Photon registration during an alarm — red, flash
Signals can be turned on/off by groups:
- All sounds
- Button press sound
- Photon registration sound
- All vibration types
- Light indication
Summary table of events and signals:
| Event / state | Screen | Sound | Vibration | Light |
|---|---|---|---|---|
Turning on | – | + | + | – |
Turning off | – | + | – | – |
Establishing a connection |
| + | – | – |
Loss of connection | – | + | – | – |
Low battery charge |
| + | + | – |
Charging |
| – | – | blue — continuous |
Find the device | – | + | + | – |
Button press | – | + | + | – |
Photon registration | – | + | – | green, red — flashes |
Alarm 1 |
| + | + | – |
Alarm 2 |
| + | + | – |
Over-range |
| + | + | – |
Temperature alarm |
| + | – | – |
Sound, light and vibration complement the information on the display and provide a response when buttons are pressed.
Updated: Oct 21, 2026